If you are using Oracle database, at some point you might have to deal with uploading data to the tables from a text file.
This article provides 10 practical examples on how to upload data from a flat file to Oracle tables.
Input data file for SQL*Loader
This is the input text file that contains the data that needs to be loaded into an oracle table. Each and every records needs to be in a separate line, and the column values should be delimited by some common delimiter character. For some of the examples mentioned below, we’ll use the following employee.txt file to upload the data to the employee table.
$ cat employee.txt
100,Thomas,Sales,5000
200,Jason,Technology,5500
300,Mayla,Technology,7000
400,Nisha,Marketing,9500
500,Randy,Technology,6000
501,Ritu,Accounting,5400
SQL*Loader Control File
This contains the instructions to the sqlldr utility. This tells sqlldr the location of the input file, the format of the input file, and other optional meta data information required by the sqlldr to upload the data into oracle tables.
$ cat example1.ctl
load data
infile '/home/ramesh/employee.txt'
into table employee
fields terminated by ","
( id, name, dept, salary )
The above control file indicates the following:
infile – Indicates the location of the input data file
into table – Indicates the table name where this data should be inserted
fields terminated by – Indicates the delimiter that is used in the input file to separate the fields
( id, name, dept, salary ) – Lists the name of the column names in the table into which the data should be uploaded
1. Basic Upload Example Using SQL*Loader
First, create the employee table as shown below.
SQL> create table employee
(
id integer,
name varchar2(10),
dept varchar2(15),
salary integer,
hiredon date
)
Next create the control file that explains what needs to be upload and where.
$ cat sqlldr-add-new.ctl
load data
infile '/home/ramesh/employee.txt'
into table employee
fields terminated by ","
( id, name, dept, salary )
Note: If you have the values inside the data file enclosed with double quote, use this in your control file: fields terminated by “,” optionally enclosed by ‘”‘
Note: If you don’t have the table created, you’ll get the following error message:
SQL*Loader-941: Error during describe of table EMPLOYEE
ORA-04043: object EMPLOYEE does not exist
You can pass the userid and password to the sqlldr command using any one of the following format. As you see below, both of these will prompt you for control file location, as it was not given in the command line.
$ sqlldr scott/tiger
(or)
$ sqlldr userid=scott/tiger
control =
SQL*Loader-287: No control file name specified.
Execute the sqlldr command to upload these new record to the empty table by specifying both uid/pwd and the control file location as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-add-new.ctl
Commit point reached - logical record count 5
Verify the the records are created in the database
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- -------
100 Thomas Sales 5000
200 Jason Technology 5500
300 Mayla Technology 7000
400 Nisha Marketing 9500
500 Randy Technology 6000
This will create the output log file in the same name as the data file, but with the .log extension (instead of .ctl). Partial output shown below.
$ cat sqlldr-add-new.log
Control File: /home/ramesh/sqlldr-add-new.ctl
Data File: /home/ramesh/employee.txt
Table EMPLOYEE:
5 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Elapsed time was: 00:00:00.04
CPU time was: 00:00:00.00
If you are new to Oracle database, and like to install it, follow this Oracle 11g installation guide.
2. Inserting Additional Records
Let us say you want to add two new employees to the employee table from the following newemployee.txt file.
$ vi newemployee.txt
600,Ritu,Accounting,5400
700,Jessica,Marketing,7800
If you create a similar control file like the previous example, you might get the following error message.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-add-more.ctl
SQL*Loader-601: For INSERT option, table must be empty. Error on table EMPLOYEE
The above indicates that the table should be empty before you can upload data using sql*loader.
If you like to insert more data to the tables without having to delete the existing rows, use the “append’ command as shown in the following control file.
$ vi sqlldr-append-more.ctl
load data
infile '/home/ramesh/newemployee.txt'
append
into table employee
fields terminated by ","
( id, name, dept, salary )
Now, if you do sqlldr this will append the data.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-append-more.ctl
Commit point reached - logical record count 2
Verify that the records are appended successfully
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- -------
100 Thomas Sales 5000
200 Jason Technology 5500
300 Mayla Technology 7000
400 Nisha Marketing 9500
500 Randy Technology 6000
600 Ritu Accounting 5400
700 Jessica Marketing 7800
3. Data inside the Control File using BEGINDATA
You can also specify the data directly inside the control file itself using BEGINDATA keyword. i.e Anything that comes after BEGINDATA will be treated as data to be uploaded to the table as shown below.
$ cat sqlldr-add-new-with-data.ctl
load data
infile *
into table employee
fields terminated by ","
( id, name, dept, salary )
begindata
100,Thomas,Sales,5000
200,Jason,Technology,5500
300,Mayla,Technology,7000
400,Nisha,Marketing,9500
500,Randy,Technology,6000
Note: The infile will say ‘*’ in this case, as there is no input data file name for this example.
Execute sqlldr to upload the data from the control file.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-add-new-with-data.ctl
4. Date format and Different Delimiter
This example shows how to specify a date format in the control file and how to handle different delimiters in a data file
The following example has different delimiters ($ after name, ^ after department).
$ cat employee-date.txt
100,Thomas$Sales^5000,31-JAN-2008
200,Jason$Technology^5500,01-Feb-2005
300,Mayla$Technology^7000,10-Aug-2000
400,Nisha$Marketing^9500,12-Dec-2011
500,Randy$Technology^6000,01-JAN-2007
Create the following control file and indicate the field delimiters for each and every field using “terminated by” as shown below.
$ cat sqlldr-date.ctl
load data
infile '/home/ramesh/employee-date.txt'
into table employee
fields terminated by ","
( id, name terminated by "$", dept terminated by "^", salary, hiredon DATE "dd-mon-yyyy" )
Load the data using sqlldr as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-date.ctl
Verify that the data got loaded properly as shown below.
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- ---------
100 Thomas Sales 5000 31-JAN-08
200 Jason Technology 5500 01-FEB-05
300 Mayla Technology 7000 10-AUG-00
400 Nisha Marketing 9500 12-DEC-11
500 Randy Technology 6000 01-JAN-07
5. Fixed Length Data Upload
If you have a data file without data that are fixed length (i.e without any delimiter), you can use this example to upload this data.
For this example, let us use the following file which has data that are of fixed length. For example, 1st three characters are always employee number, Next 5 characters are always employee name, etc.
$ cat employee-fixed.txt
200JasonTechnology5500
300MaylaTechnology7000
400NishaTechnology9500
500RandyTechnology6000
Create the following control file, where you specific the position of each and every field as shown below usig the “Position(start:end)” syntax.
$ cat sqlldr-fixed.ctl
load data
infile '/home/ramesh/employee-fixed.txt'
into table employee
fields terminated by ","
( id position(1:3), name position(4:8), dept position(9:18), salary position(19:22) )
Load this fixed length data using the sqlldr as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-fixed.ctl
Verify that the data got loaded.
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- ---------
200 Jason Technology 5500
300 Mayla Technology 7000
400 Nisha Technology 9500
500 Randy Technology 6000
6. Change the data during upload
You can also massage the data and change it during upload based on certain rules.
In the following control file:
id is incremented by 999 before uploading. i.e if the emp id is 100 in the data file, it will be loaded as 1099
Convert the name to upper case and load it. This uses the upper function.
If the department contains the value “Technology” change it to “Techies”. This uses decode function
$ cat sqlldr-change-data.ctl
load data
infile '/home/ramesh/employee.txt'
into table employee
fields terminated by ","
( id ":id+999",
name "upper(:name)",
dept "decode(:dept,'Technology','Techies', :dept)",
salary
)
Load the data using this control file which will massage the data before uploading it.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-change-data.ctl
Verify that the data got changed while loading as per our rules.
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- ---------
1099 THOMAS Sales 5000
1199 JASON Techies 5500
1299 MAYLA Techies 7000
1399 NISHA Marketing 9500
1499 RANDY Techies 6000
7. Load data from multiple files
To load data from multiple files, you just have to specify multiple infile in the control file.
The following control file loads data from two different data files (employee.txt and newemployee.txt) to the employee table.
$ sqlldr-add-multiple.ctl
load data
infile '/home/ramesh/employee.txt'
infile '/home/ramesh/newemployee.txt'
into table employee
fields terminated by ","
( id, name, dept, salary )
Load the data using this control file which will upload data from multiple data files as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-add-multiple.ctl
Commit point reached - logical record count 5
Commit point reached - logical record count 7
8. Load data to Multiple Tables
Create another table called bonus which will have employee id and bonus columns.
create table bonus
( id integer,
bonus integer
);
Create the employee-bonus.txt data file that contains the fields: id, name, department, salary, bonus
$ cat employee-bonus.txt
100 Thomas Sales 5000 1000
200 Jason Technology 5500 2000
300 Mayla Technology 7000 2000
400 Nisha Marketing 9500 1000
500 Randy Technology 6000 3000
Create the control file as shown below, which will upload the data from the above file to two different tables. As shown below, you should have two “into table” commands, and specify the position of the data which needs to be used to upload the data to that column.
$ cat sqlldr-multiple-tables.ctl
load data
infile '/home/ramesh/employee-bonus.txt'
into table employee
( id position(1:3),
name position(5:10),
dept position(12:21),
salary position(23:26))
into table bonus
( id position(1:3),
bonus position(28:31))
Load the data to multiple tables using this control file as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-multiple-tables.ctl
Verify that the data got loaded to multiple tables successfully.
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- ---------
100 Thomas Sales 5000
200 Jason Technology 5500
300 Mayla Technology 7000
400 Nisha Marketing 9500
500 Randy Technology 6000
SQL> select * from bonus;
ID BONUS
---------- ----------
100 1000
200 2000
300 2000
400 1000
500 3000
9. Handling Bad (Rejected) Records
In the following example, we have two bad records. Employee id 300 and 500 has salary column which is not numeric.
$ cat employee-bad.txt
100,Thomas,Sales,5000
200,Jason,Technology,5500
300,Mayla,Technology,7K
400,Nisha,Marketing,9500
500,Randy,Technology,6K
Use the following control file for this example.
$ cat sqlldr-bad.ctl
load data
infile '/home/ramesh/employee-bad.txt'
into table employee
fields terminated by ","
( id, name, dept, salary )
Load the data (including the invalid records) using this control file as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-bad.ctl
Commit point reached - logical record count 5
As you see from the abvoe output, it still says “logical record count 5″, but you should check the log files to see if it has rejected any records.
The log file indicates that 2 records are rejected as shown below:
Control File: /home/ramesh/sqlldr-bad.ctl
Data File: /home/ramesh/employee-bad.txt
Bad File: /home/ramesh/employee-bad.bad
Discard File: none specified
Table EMPLOYEE:
3 Rows successfully loaded.
2 Rows not loaded due to data errors.
By default the rejected records are stored in a file that has the same name as the data file (but with .bad extension)
$ cat employee-bad.bad
300,Mayla,Technology,7K
500,Randy,Technology,6K
As you see below, the employee table has only 3 records (as 2 of them were rejected).
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- ---------
100 Thomas Sales 5000
200 Jason Technology 5500
400 Nisha Marketing 9500
10. Load Specific Rows from a datafile
If you want to load only a specific records from a data file use the WHEN in the control file.
Add the line “when” next to “into table” line. In the following control file, the when clause indicates that it will load only the records that have dept as “Technology”.
$ cat sqlldr-when.ctl
load data
infile '/home/ramesh/employee.txt'
into table employee
when dept = 'Technology'
fields terminated by ","
( id, name, dept, salary )
Load the selective data (only the “Technology” records) using this control file as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-when.ctl
Commit point reached - logical record count 5
As you see from the above output, it still says “logical record count 5″, but you should check the log files to see how many records were loaded, and how many records were discarded because it didn’t match the when condition.
The following from the log file shows that 5 records were read, and 2 of them were discarded as it didn’t match the when condition.
Discard File: none specified
Total logical records read: 5
Total logical records discarded: 2
Verify that only the selective records were loaded into the table.
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- ---------
200 Jason Technology 5500
300 Mayla Technology 7000
500 Randy Technology 6000
This article provides 10 practical examples on how to upload data from a flat file to Oracle tables.
Input data file for SQL*Loader
This is the input text file that contains the data that needs to be loaded into an oracle table. Each and every records needs to be in a separate line, and the column values should be delimited by some common delimiter character. For some of the examples mentioned below, we’ll use the following employee.txt file to upload the data to the employee table.
$ cat employee.txt
100,Thomas,Sales,5000
200,Jason,Technology,5500
300,Mayla,Technology,7000
400,Nisha,Marketing,9500
500,Randy,Technology,6000
501,Ritu,Accounting,5400
SQL*Loader Control File
This contains the instructions to the sqlldr utility. This tells sqlldr the location of the input file, the format of the input file, and other optional meta data information required by the sqlldr to upload the data into oracle tables.
$ cat example1.ctl
load data
infile '/home/ramesh/employee.txt'
into table employee
fields terminated by ","
( id, name, dept, salary )
The above control file indicates the following:
infile – Indicates the location of the input data file
into table – Indicates the table name where this data should be inserted
fields terminated by – Indicates the delimiter that is used in the input file to separate the fields
( id, name, dept, salary ) – Lists the name of the column names in the table into which the data should be uploaded
1. Basic Upload Example Using SQL*Loader
First, create the employee table as shown below.
SQL> create table employee
(
id integer,
name varchar2(10),
dept varchar2(15),
salary integer,
hiredon date
)
Next create the control file that explains what needs to be upload and where.
$ cat sqlldr-add-new.ctl
load data
infile '/home/ramesh/employee.txt'
into table employee
fields terminated by ","
( id, name, dept, salary )
Note: If you have the values inside the data file enclosed with double quote, use this in your control file: fields terminated by “,” optionally enclosed by ‘”‘
Note: If you don’t have the table created, you’ll get the following error message:
SQL*Loader-941: Error during describe of table EMPLOYEE
ORA-04043: object EMPLOYEE does not exist
You can pass the userid and password to the sqlldr command using any one of the following format. As you see below, both of these will prompt you for control file location, as it was not given in the command line.
$ sqlldr scott/tiger
(or)
$ sqlldr userid=scott/tiger
control =
SQL*Loader-287: No control file name specified.
Execute the sqlldr command to upload these new record to the empty table by specifying both uid/pwd and the control file location as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-add-new.ctl
Commit point reached - logical record count 5
Verify the the records are created in the database
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- -------
100 Thomas Sales 5000
200 Jason Technology 5500
300 Mayla Technology 7000
400 Nisha Marketing 9500
500 Randy Technology 6000
This will create the output log file in the same name as the data file, but with the .log extension (instead of .ctl). Partial output shown below.
$ cat sqlldr-add-new.log
Control File: /home/ramesh/sqlldr-add-new.ctl
Data File: /home/ramesh/employee.txt
Table EMPLOYEE:
5 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Elapsed time was: 00:00:00.04
CPU time was: 00:00:00.00
If you are new to Oracle database, and like to install it, follow this Oracle 11g installation guide.
2. Inserting Additional Records
Let us say you want to add two new employees to the employee table from the following newemployee.txt file.
$ vi newemployee.txt
600,Ritu,Accounting,5400
700,Jessica,Marketing,7800
If you create a similar control file like the previous example, you might get the following error message.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-add-more.ctl
SQL*Loader-601: For INSERT option, table must be empty. Error on table EMPLOYEE
The above indicates that the table should be empty before you can upload data using sql*loader.
If you like to insert more data to the tables without having to delete the existing rows, use the “append’ command as shown in the following control file.
$ vi sqlldr-append-more.ctl
load data
infile '/home/ramesh/newemployee.txt'
append
into table employee
fields terminated by ","
( id, name, dept, salary )
Now, if you do sqlldr this will append the data.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-append-more.ctl
Commit point reached - logical record count 2
Verify that the records are appended successfully
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- -------
100 Thomas Sales 5000
200 Jason Technology 5500
300 Mayla Technology 7000
400 Nisha Marketing 9500
500 Randy Technology 6000
600 Ritu Accounting 5400
700 Jessica Marketing 7800
3. Data inside the Control File using BEGINDATA
You can also specify the data directly inside the control file itself using BEGINDATA keyword. i.e Anything that comes after BEGINDATA will be treated as data to be uploaded to the table as shown below.
$ cat sqlldr-add-new-with-data.ctl
load data
infile *
into table employee
fields terminated by ","
( id, name, dept, salary )
begindata
100,Thomas,Sales,5000
200,Jason,Technology,5500
300,Mayla,Technology,7000
400,Nisha,Marketing,9500
500,Randy,Technology,6000
Note: The infile will say ‘*’ in this case, as there is no input data file name for this example.
Execute sqlldr to upload the data from the control file.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-add-new-with-data.ctl
4. Date format and Different Delimiter
This example shows how to specify a date format in the control file and how to handle different delimiters in a data file
The following example has different delimiters ($ after name, ^ after department).
$ cat employee-date.txt
100,Thomas$Sales^5000,31-JAN-2008
200,Jason$Technology^5500,01-Feb-2005
300,Mayla$Technology^7000,10-Aug-2000
400,Nisha$Marketing^9500,12-Dec-2011
500,Randy$Technology^6000,01-JAN-2007
Create the following control file and indicate the field delimiters for each and every field using “terminated by” as shown below.
$ cat sqlldr-date.ctl
load data
infile '/home/ramesh/employee-date.txt'
into table employee
fields terminated by ","
( id, name terminated by "$", dept terminated by "^", salary, hiredon DATE "dd-mon-yyyy" )
Load the data using sqlldr as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-date.ctl
Verify that the data got loaded properly as shown below.
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- ---------
100 Thomas Sales 5000 31-JAN-08
200 Jason Technology 5500 01-FEB-05
300 Mayla Technology 7000 10-AUG-00
400 Nisha Marketing 9500 12-DEC-11
500 Randy Technology 6000 01-JAN-07
5. Fixed Length Data Upload
If you have a data file without data that are fixed length (i.e without any delimiter), you can use this example to upload this data.
For this example, let us use the following file which has data that are of fixed length. For example, 1st three characters are always employee number, Next 5 characters are always employee name, etc.
$ cat employee-fixed.txt
200JasonTechnology5500
300MaylaTechnology7000
400NishaTechnology9500
500RandyTechnology6000
Create the following control file, where you specific the position of each and every field as shown below usig the “Position(start:end)” syntax.
$ cat sqlldr-fixed.ctl
load data
infile '/home/ramesh/employee-fixed.txt'
into table employee
fields terminated by ","
( id position(1:3), name position(4:8), dept position(9:18), salary position(19:22) )
Load this fixed length data using the sqlldr as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-fixed.ctl
Verify that the data got loaded.
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- ---------
200 Jason Technology 5500
300 Mayla Technology 7000
400 Nisha Technology 9500
500 Randy Technology 6000
6. Change the data during upload
You can also massage the data and change it during upload based on certain rules.
In the following control file:
id is incremented by 999 before uploading. i.e if the emp id is 100 in the data file, it will be loaded as 1099
Convert the name to upper case and load it. This uses the upper function.
If the department contains the value “Technology” change it to “Techies”. This uses decode function
$ cat sqlldr-change-data.ctl
load data
infile '/home/ramesh/employee.txt'
into table employee
fields terminated by ","
( id ":id+999",
name "upper(:name)",
dept "decode(:dept,'Technology','Techies', :dept)",
salary
)
Load the data using this control file which will massage the data before uploading it.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-change-data.ctl
Verify that the data got changed while loading as per our rules.
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- ---------
1099 THOMAS Sales 5000
1199 JASON Techies 5500
1299 MAYLA Techies 7000
1399 NISHA Marketing 9500
1499 RANDY Techies 6000
7. Load data from multiple files
To load data from multiple files, you just have to specify multiple infile in the control file.
The following control file loads data from two different data files (employee.txt and newemployee.txt) to the employee table.
$ sqlldr-add-multiple.ctl
load data
infile '/home/ramesh/employee.txt'
infile '/home/ramesh/newemployee.txt'
into table employee
fields terminated by ","
( id, name, dept, salary )
Load the data using this control file which will upload data from multiple data files as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-add-multiple.ctl
Commit point reached - logical record count 5
Commit point reached - logical record count 7
8. Load data to Multiple Tables
Create another table called bonus which will have employee id and bonus columns.
create table bonus
( id integer,
bonus integer
);
Create the employee-bonus.txt data file that contains the fields: id, name, department, salary, bonus
$ cat employee-bonus.txt
100 Thomas Sales 5000 1000
200 Jason Technology 5500 2000
300 Mayla Technology 7000 2000
400 Nisha Marketing 9500 1000
500 Randy Technology 6000 3000
Create the control file as shown below, which will upload the data from the above file to two different tables. As shown below, you should have two “into table” commands, and specify the position of the data which needs to be used to upload the data to that column.
$ cat sqlldr-multiple-tables.ctl
load data
infile '/home/ramesh/employee-bonus.txt'
into table employee
( id position(1:3),
name position(5:10),
dept position(12:21),
salary position(23:26))
into table bonus
( id position(1:3),
bonus position(28:31))
Load the data to multiple tables using this control file as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-multiple-tables.ctl
Verify that the data got loaded to multiple tables successfully.
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- ---------
100 Thomas Sales 5000
200 Jason Technology 5500
300 Mayla Technology 7000
400 Nisha Marketing 9500
500 Randy Technology 6000
SQL> select * from bonus;
ID BONUS
---------- ----------
100 1000
200 2000
300 2000
400 1000
500 3000
9. Handling Bad (Rejected) Records
In the following example, we have two bad records. Employee id 300 and 500 has salary column which is not numeric.
$ cat employee-bad.txt
100,Thomas,Sales,5000
200,Jason,Technology,5500
300,Mayla,Technology,7K
400,Nisha,Marketing,9500
500,Randy,Technology,6K
Use the following control file for this example.
$ cat sqlldr-bad.ctl
load data
infile '/home/ramesh/employee-bad.txt'
into table employee
fields terminated by ","
( id, name, dept, salary )
Load the data (including the invalid records) using this control file as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-bad.ctl
Commit point reached - logical record count 5
As you see from the abvoe output, it still says “logical record count 5″, but you should check the log files to see if it has rejected any records.
The log file indicates that 2 records are rejected as shown below:
Control File: /home/ramesh/sqlldr-bad.ctl
Data File: /home/ramesh/employee-bad.txt
Bad File: /home/ramesh/employee-bad.bad
Discard File: none specified
Table EMPLOYEE:
3 Rows successfully loaded.
2 Rows not loaded due to data errors.
By default the rejected records are stored in a file that has the same name as the data file (but with .bad extension)
$ cat employee-bad.bad
300,Mayla,Technology,7K
500,Randy,Technology,6K
As you see below, the employee table has only 3 records (as 2 of them were rejected).
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- ---------
100 Thomas Sales 5000
200 Jason Technology 5500
400 Nisha Marketing 9500
10. Load Specific Rows from a datafile
If you want to load only a specific records from a data file use the WHEN in the control file.
Add the line “when” next to “into table” line. In the following control file, the when clause indicates that it will load only the records that have dept as “Technology”.
$ cat sqlldr-when.ctl
load data
infile '/home/ramesh/employee.txt'
into table employee
when dept = 'Technology'
fields terminated by ","
( id, name, dept, salary )
Load the selective data (only the “Technology” records) using this control file as shown below.
$ sqlldr scott/tiger control=/home/ramesh/sqlldr-when.ctl
Commit point reached - logical record count 5
As you see from the above output, it still says “logical record count 5″, but you should check the log files to see how many records were loaded, and how many records were discarded because it didn’t match the when condition.
The following from the log file shows that 5 records were read, and 2 of them were discarded as it didn’t match the when condition.
Discard File: none specified
Total logical records read: 5
Total logical records discarded: 2
Verify that only the selective records were loaded into the table.
SQL> select * from employee;
ID NAME DEPT SALARY HIREDON
---------- ---------- --------------- ---------- ---------
200 Jason Technology 5500
300 Mayla Technology 7000
500 Randy Technology 6000
No comments:
Post a Comment